|
|
|
|
|
Flowmeter Range
The widest choice of techniques
|
|
Proven in virtually any application
- ABB Variable Area Flowmeters have the largest world-wide number of
installations of any brand. A highly economical solution to a wide range
of low flow liquid, gas and steam applications handling flows of less
than 50cc/min (3cu in/min) air or 0.55cc/min (0.03cu in/min) in water.
|
|
FAM5400 (AM54) |
The
flowmeter operation is based on the variable area principle. They can be utilized for measuring the flow of liquids, steam and gases. Especially when aggressive or opaque fluids are to be metered. They are indispensabele where high pressure and/ or high temperature operating conditions exist.
|
FAM 3200 (Armored Purgemeter - Series 10A3200) |
The
armored Purgemeter offers possibilities for metering small gas and
liquid flows. This meter is especially suited for meter applications
with cloudy, opaque or aggressive fluids in chemical and pharmaceutical
industries. For all applications where glass tube meters cannot be
utilized due safety considerations.
|
|
FAG1190
|
The
wide variety of float weights and meter tubes allows the Glass Tube
Flowmeter FAG1190 to be matched exactly to the required flow range. The
bead design is the standard meter tube design in sizes 1/16" to 2". The
three ribs, which are parallel to the center axis of the meter tube,
guide the float over the entire flow range. This assures a high degree
of reproducibility because the float is absolutely centered in the meter
tube.
|
FAG3500 Download Specification Sheet .pdf |
Glass Tube Flowmeter The wide variety of float weights and meter tubes allows the Glass Tube Flowmeter FAG3500 to be matched precisely to the required flow range. The FAG3500 has a replaceable metering tube with O-ring seals. The standard meter in sizes ½ to 2 in. uses the beaded tube design, in which three beads in the tube wall – and parallel to the tube axis – guide the float, locating it exactly in the centre of the tube. Special high-capacity floats are available that are guided via a central rod within plain (non-beaded) tapered tubes. Keeping the float in the centre of the tube using these methods ensures high reproducibility.
|
|
FAG3600 |
Glass Tube Flowmeter The wide variety of float weights and meter tube enables the Glass Tube Flowmeter FAG3600 to be matched precisely to the required flow range. The FAG3600 has a replaceable metering tube with gland-type seals, enabling the seal to be re-established, following any leakage, without stopping the flow. The standard meter in sizes ½ to 2 in. uses the beaded tube design, in which three beads in the tube wall – and parallel to the tube axis – guide the float, locating it exactly in the centre of the tube. Special high-capacity floats are available that are guided via a central rod within plain (non-beaded) tapered tubes. Keeping the float in the centre of the tube using these methods ensures high reproducibility.
|
FAG6100 |
Purgemeter This flowmeter family features a stable, corrosion resistant housing made of SS 1.4301 [304 SS].The quick and easy to handle Snap-In technology assures fast assembly and disassembly of the meter tube. Flow ranges: min. 0.05 to max. 2300 cm3/min (water) min. 4.8 to max. 69200 cm3/min (air).
|
