|
|
|
|
|
Flowmeter Range
The widest choice of techniques
|
|
The world’s largest and finest
choice of electromagnetic flowmeters from ABB for conductive fluids –
water, pastes, acids, lyes, juices and emulsions including fluids with a
conductivity as low as 0.05µS/cm (0.05µmhos). With a vast range of
capabilities, our extensive range includes electromagnetic flowmeter for
virtually any application.
|
|
FSM4000 |
The
flowrate of liquids, slurries, pastes and sludges can be measured
accurately with the electromagnetic flowmeter. Minimum conductivity 20
µS/cm (Option 0,5 µS/cm). The measurement system consists of a flowmeter
primary and a converter in a remote mounted design.It is specially
designed to measure liquids in the pulp & paper and the food & beverage
industry.
|
|
FXE4000 (COPA-XE/ MAG-XE)  |
The
Electromagnetic Flowmeter (EMF) can be used to accurately measure the
flowrate of liquids which have an electrical conductivity greater than 5
µS/cm (20 µS/cm for demineralized water). The COPA-XE is a flow measurement system in a Compact Design. The MAG-XE flow measurement system consists of a flowmeter primary and a remote mounted converter
|
|
FXM2000 (COPA-/MAG-XM and COPA-/MAG-CM)  |
The
flowrate of liquids, slurries, pastes and sludges can be measured
accurately with the electromagnetic flowmeter. Minimum conductivity 5
µS/cm standard or 0.05 µS/cm at meter with capacitive signal pick up.
The measurement system consists of a flowmeter primary and a converter
in a compact or remote mounted design. The capacitive signal pickup can
be used for fluids which form insulating coatings on the liners.
|
FES7000 (Fill-Mag) Download Specification Sheet .pdf |
The
flowrate of liquids, slurries, pastes and sludges can be measured
accurately with the electromagnetic flowmeter. Minimum conductivity 20
µS/cm (Option 0,5 µS/cm). The intelligent filling and dosing system
consists of a flowmeter primary and a converter in a remote mounted
design. Especially suited for batch, filling and injection processes,
from minute quantities to large container filling.
|
FXF2000 (COPA-XF) |
The
flowrate of liquids, slurries, pastes and sludges can be measured
accurately with the electromagnetic flowmeter. Minimum conductivity 5
µS/cm. The measurement system consists of a flowmeter primary and a
converter in a compact design. Due to its compact design is ideally
suited for installation in filling systems, especially in battery
mounting arrangements
|
FXT4000 (COPA-XT) |
The
flowrate of liquids, slurries, pastes and sludges can be measured
accurately with the electromagnetic flowmeter. Minimum conductivity 20
µS/cm. The FXT4000 is a flowmetering system in a Compact Design
utilizing 2-Wire-Technology –primary and converter comprise a single
entity and are supplied from a central power supply DC or a transmitter
power supply instrument.
|
AquaMaster AMAS |
Electronic Flowmeter Aquamaster conforms to the latest international standards to meet increasing legislative demands for accurate flow metering. Its wide measuring range ensures peak daytime flows are accurately recorded and its exceptional low flow performance aids network leak detection. Fit and flow for foolproof installation, all data is stored in the sensor to reduce on-site setup. Battery operation facilitates installation in remote locations. Aquamasters unique sensor design conditions the flow profile resulting in excellent meter performance in poor hydraulic installation conditions.
|
AquaMaster R AMASR |
Electronic Flowmeter for Water Network Service Aquamaster R has been optimised to meet the requirements of revenue applications. Widest flow range, optimum accuracy and long term stable calibration ensure equitable billing. Two fully programmable time dependant totalisers record flow volume to enable water to be billed at different pre arranged tariffs. Remote reading using standard inductive pad, totals can be read without access to the flow meter
|
AquaMaster S |
Electronic Watermeter for Water Network Management Aquamaster S has been designed to improve the management of potable water distribution networks. Integral multi-speed, multi-channel dual variable data logger flow meter and data logger as a single unit, improves the precision and quality of logged information. Pressure sensor input monitors line pressure for total system management. GSM and SMS communication enables centralised automatic meter reading and data download. Flash programming technology supports future software enhancement upgrade of an installed Aquamaster S. Aquamaster is compatible with industry-standard data base systems: Technolog, Primayer, OSI and IBV.
|
AquaProbe |
Insertion-Type Electromagnetic Probe Flowmeter Aquaprobe is an economic alternative to full bore flow meters. It comprises an electromagnetic sensing head mounted on the end of a support rod. Aquaprobe finds application in existing water distribution systems where provision for flow metering was not originally made and where a full bore flow meter would be uneconomic. The assembly can be installed in existing pipelines without the need for major excavations or alterations to pipe work normally associated with the installation full bore meters.
|
|
AquaProbe 2
|
Insertion-Type Electromagnetic Probe Flowmeter Aquaprobe 2 uses the same sensor as Aquaprobe, connected to the revolutionary Aquamaster electronic display unit. It incorporates all the benefits of Aquaprobe I plus: Integral multi-speed, multi-channel dual variable data logger, flow meter and data logger as a single unit improves the precision and quality of logged information. Battery operation makes it ideal for temporary installation to survey existing potable water distribution networks. GSM and SMS communication enables centralised, automatic meter data download.
|
FXP4000
(PARTI-MAG II) |
The
flowrate of liquids with electrical conductivities of at least 50 µS/cm
up to 10 mS/cm can be measured even when the pipeline is partially full.
The PARTI-MAG II consists of a flowmeter primary and a remote mounted converter.
|
|
MagMaster
Download Specification Sheet .pdf |
MagMaster Electromagnetic Flowmeter MagMaster is suitable for all applications found in the water industry from potable to waste water treatment. MagMaster’s IP 68 rating and two year warranty permits the sensor to be buried, this eliminates the need for meter pits or chambers and so reduces installation costs. Wide flow range and class-leading accuracy improves control and quality of water distribution networks and water treatment works. CalMaster compatible, routine calibration verification to comply with regulatory requirements can be achieved without removing the sensor from service.
|
Magmaster Loflo
Download Specification Sheet .pdf |
Electromagnetic Flowmeter Magmaster Loflo is an extension of the world-renowned Magmaster range of flow meters, it utilises the same proven electronic transmitter but with a new sensor design. The sensors unique internal contour reduces sensitivity to flow profile disturbances resulting in outstanding performance in less than ideal installation conditions. At the same time the fluid velocity is increased through the sensor giving extended low flow performance. IP68 rating and two year warranty permits the sensor to be buried eliminating the need for meter pits or chambers and so reduces installation costs.
|
CalMaster |
Calmaster has been introduced in response to demands from the water
industry for traceable in-situ flow meter verification. Calmaster
performs a complex series of tests, which ensure correct functionality
and calibration of the flow meter. A simple to follow Windows interface
guides the user through the automated series of tests. On completion a
certificate is produced to comply with regulatory requirements.
Calmaster can be used on existing Magmaster installations but with a
reduce accuracy. Magmaster with a factory fingerprint will be given a
certificate of 1% existing Magmasters without a factory fingerprint will
be given a 2% certificate.
|
FXL4000 (COPA-XL) |
COPA-XL
is the right choice for magneto-inductive measurement in pipes with a
nominal size DN of 10-300 COPA-XL has no moving parts, is maintenance-free and does not cause any drag reduction. This light-weight sensor with integrated electronics can be installed directly in the pipe without requiring additional mountings. The power supply and the signal outputs are simply connected via plugs. COPA-XL is ready to operate, saving you time and cost.
|
FXL5000 (Miniflow) |
Miniflow is the electromagnetic flow-meter alternative to other metering
methods in the size range from 3/8" to 2" / DN 10 to 50. Due to its low cost it is no longer necessary to deny oneself of the benefits of an electromagnetic flowmeter. The Miniflow can be easily and quickly installed in your piping system using its threaded connectors. The wide variety of available connection adapters expands the possibilities for installing the meter in any type of pipe, ranging from all the way from copper to plastic. The Miniflow always fits.
|
