The Denso Rolling Rig is designed for tape application to pipe lengths ensuring constant tension and overlap. The rig enables the convenience of on-site wrapping and avoids abrasion damage to the coating in transit. The machine can wrap up to 1.9m in diameter and 13m in length.

• In Situ operation/Fast and convenient
• Automatic interleaving removal
• No transit damage to wrapped pipes
• pipe wrapping to suit site programme
  
  

These machines ensure correct tension and overlap of tape during application.

The Bitumen Tape Machines are for the application of Densopol and Densoclad Tapes. The tape spool and interleaving removal head is a separate unit and two of these units can be fitted to the frame at any time. The machines are robustly built to enable rolls of tape up to 30m long and 230mm wide to be used.

The Petrolatum Tape Machines are for the application of Denso and Densyl Tapes. They can be
used for a single wrap or with a simultaneous application of outerwrap tape.

The Densoman is a compact hand operated machine for the wrapping of pipe lengths with Densoclad and Densopol bitumen tapes as well as Denso Marine Piling Tape and Denso Hotline Petrolatum Tapes/Steelcoat 200 .

The machine relies on the tension on the tape to hold it in position during operation.

• Automatic interleaving removal
• Range of machines available to wrap pipe diameters 50-600mm
• Suitable for wrapping tie bars

An applicator used to apply cold fabric reinforced polymer bitumen strips for use as a waterproof seal over cracks. The tape is loaded onto the applicator and is then manually applied as required automatically removing the interleaving.

An integrated pumping and mixing unit available for the injection of SeaShield 550 Epoxy Grout into the bespoke Fibre-Form fabricated fibreglass jacket.

The fibreglass jacket is prepared with stand-offs prior to using the SeaShield 550 Epoxy
Grout and then positioned and strapped in place prior to application. Once the 550 Epoxy Grout has been mixed it can then be easily pumped into the Fiber-Form Jacket due to its excellent flowability characteristics. This can be done above and/or below the water with our customised pumping equipment.

SeaShield Series 500 System is tough, durable and provides the ultimate protection to restore steel, concrete and timber piles.