 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
| Archco Rigidon Product Guide |
|||||||
|---|---|---|---|---|---|---|---|
SYSTEM |
DESCRIPITION |
Method of Application |
Applied Thickness (approx.) |
Designation |
Substrate |
Temperature Limits |
|
Immersion |
Fumes/Spillage |
||||||
Flake Filled Coatings |
|||||||
200 Series |
Linings & Coatings, reinforced with inert flakes, which are specifically recommended for use in sea water applications and water treatment industries for both internal and external protection. |
Spray or brush |
1 mm |
Coating or lining |
Steel |
60°C (140°F) |
90°C (2000°F) |
Glass Flake Linings
|
|||||||
400 Series |
Medium duty linings which are reinforced with glass flakes. Theses systems are suitable in immersion conditions for duties which include severe chemical environments. |
Spray or brush |
1 mm |
Lining |
Steel |
60°C (140°F) |
90°C (2000°F) |
500 Series |
Heavy duty linings which are reinforced with glass flakes. These linings offer the ultimate in chemical resistance within the glass flake range of materials and can operate at temperatures up to 100°C under immersion conditions. These linings may also be used where abrasion and erosion resistance is more crucial. |
Spray or trowel |
2 mm |
Lining |
Steel |
100°C (212°F) |
170°C (338°F) |
Filled Reinforced Linings
|
 |
||||||
600 Series |
Linings which are formulated from resin and glass fibre reinforcement together with a filled base coat. These linings are specifically recommended when a lining with a resin rich top coat is required for maximum chemical resistance. |
Trowel and hand lay-up |
3mm - 4mm |
Lining |
Steel or concrete |
75°C (170°F) 60°C (140°F) |
75°C (170°F) 60°C (140°F) |
700 Series |
A silica filled, glass cloth reinforced series of linings designed for heavy duty concrete and flooring protection, but can also be used on steel. |
Trowel |
3mm - 4mm |
Lining |
Concrete flooring |
75°C (170°F) |
150°C (300°F) |
| Specialty Coatings | |||||||
Heatshield |
A specially developed lining for the offshore industry which is resistant to sea water and oil at operating temperatures up to 150°C maximum. The lining has a hard high gloss finish. | Spray |
400 microns |
Lining |
Steel |
150°C (300°F) |
150°C (300°F) |
Filterline |
A lining which has been specifically developed for use in swimming pool and industrial filters. Resistant to chlorine, ozone and back flushing. | Spray or brush |
1 mm |
Lining |
Steel |
70°C (160°F) |
70°C (160°F) |
Rigspray |
A lining developed for use in road and rail tankers carrying aggressive chemical products or acid waste. A specially developed top coat gives resistance to Hydrofluoric acid. | Spray or trowel |
2 mm |
Lining |
Steel |
100°C (212°F) |
100°C (212°F) |
|
|||||||
