|
|
|
|
|
Analytical Instruments
For over half a century, ABB has
developed, manufactured, supplied and installed analytical instruments
for the process, environmental, steam and power industries. |
|
|
|
|
Conductivity
Analyzers Conductivity techniques ABB conductivity analysers are designed to meet the most exacting requirements of our valued customers. The extensive range covers 2 and 4-wire analysers and single or dual-input devices. Our hazardous area certifications embrace FM, CSA and CENELEC ATEX intrinsic safety. Instruments are available with HART, Profibus PA or DP, and Fieldbus Foundation communications capabilities. 2-Electrode Contacting Cells - Range 0 to 10,000 µS/cm High accuracy technique for trace conductivities from ultrapure water to industrial rinse waters. An alternating current is passed between two electrodes in contact with a solution. The transmitter converts the resultant potential difference into conductivity, concentration or specific resistance. 2-Electrode Contacting Cells - United States Pharmacopœia <645> Traceable calibration instruments for WFI and PW processes in the Pharmaceutical Industry. 4- or 6-Electrode Contacting Cells - Range 0 to 2,000 mS/cm Auto-compensating technology for high level conductivity and concentration measurements in high-coating processes. Electrodeless sensors - Range 0 to 2,000 mS/cm Non-contact technique providing immunity to polarisation, oily fouling and non-conducting coatings until gross fouling occurs. Measurement of the magnitude of induced AC into a closed loop of solution using two embedded toroids.
|
|
|
AnalyzeIT AX410
|
AnalyzeIT AX410 2-Electrode Conductivity Analyzer The AX410 is designed for use with ABB’s 2 electrode conductivity cells. The transmitter measures conductivity or resistivity with exceptional accuracy and performance. It incorporates the latest technology to provide a highly reliable, yet flexible, feature-packed device that satisfies a diverse range of process monitoring and control applications. Applications include demineralisation and reverse osmosis plants, semiconductor industry, power plants, biomedical and pharmaceutical industries and large steam-raising plants in Pulp & Paper, Steel and Chemicals.
|
|
AX411
|
AX411 Dual Input, 2-Electrode Conductivity Analyzer The AX411 is designed for use with two ABB 2 electrode conductivity cells. The cost-saving transmitter measures conductivity or resistivity with exceptional accuracy and performance. It incorporates the latest technology to provide a highly reliable, yet flexible, feature-packed device that satisfies a diverse range of process monitoring and control applications. Applications include demineralisation and reverse osmosis plants, semiconductor industry, power plants, biomedical and pharmaceutical industries and large steam-raising plants in Pulp & Paper, Steel and Chemicals.
|
|
AnalyzeIT AX413
|
AnalyzeIT AX413 Dual-Input, 2-Electrode Conductivity / 4-Electrode Conductivity Analyzer The AX413 is designed for use with ABB’s 2 and 4-electrode conductivity cells. The cost-saving analyzer measures low-range µS/cm and high-range mS/cm conductivity simultaneously, with exceptional accuracy and performance. It incorporates the latest technology to provide a highly reliable, yet flexible, feature-packed device that satisfies a diverse range of process monitoring and control applications – click on the 'Data' tab to view.
|
|
AnalyzeIT AX416
|
AnalyzeIT AX416 Dual Input, 2-Electrode Conductivity/pH Analyzer The AX416 is designed for use with ABB’s pH and 2-electrode conductivity cells. The cost-saving transmitter simultaneously measures pH and conductivity or resistivity with exceptional accuracy and performance. It incorporates the latest technology to provide a highly reliable, yet flexible, feature-packed device that satisfies a diverse range of process monitoring and control applications – click on the 'Data' tab to view.
|
|
TB82TE
|
TB82TE The ABB TB82TE Series Two-Wire Transmitters for use with two-electrode conductivity sensors (TB2 family) are available with traditional programmable outputs or with advanced digital communications utilizing HART, Foundation Fieldbus or Profibus PA. The TB82EC is ATEX and CE certified, intrinsically safe and non-incendive. These industrially hardened transmitters lead the industry in ease of use and durability in the most demanding installations.
|
|
TB84TE
|
TB84TE The ABB TB84TE Series Four-Wire Transmitters for use with two-electrode conductivity sensors (TB2 family) are available with programmable outputs, easy to read LCD display and advanced diagnostics. These industrially hardened transmitters lead the industry in ease of use and durability in the most demanding installations where line powered instruments are required.
|
|
AnalyzeIT AX450
|
AnalyzeIT AX450 Single Input USP<645> Conductivity Analyzer The AX450 is designed for use with ABB’s 2 electrode conductivity cells for complete compliance with USP<645>. The cost-saving transmitter measures conductivity with exceptional accuracy and performance. It incorporates the latest technology to provide a highly reliable, yet flexible, feature-packed device that satisfies the needs of the Global pharmaceutical industries. The unit provides an automatic Stage 1 alarm for USP monograph 645 and comes complete with all requisite documentation.
|
|
AnalyzeIT AX455
|
AnalyzeIT AX455 Dual Input USP <645> Conductivity Analyzer The AX455 is designed for use with ABB’s 2 electrode conductivity cells for complete compliance with USP<645>. The cost-saving transmitter simultaneously measures 2 conductivity points with exceptional accuracy and performance. It incorporates the latest technology to provide a highly reliable, yet flexible, feature-packed device that satisfies the needs of the Global pharmaceutical industries. The unit provides an automatic Stage 1 alarm for USP monograph 645 and comes complete with all requisite documentation.
|
|
4623
|
4623
USP <645> Conductivity Analyzer The 4623 is a wall-mount analyzer used with ABB's 2-electrode conductivity cells for complete compliance with USP <645>. The analyzer measures conductivity with exceptional accuracy and performance and provides a highly reliable device that satisfies the needs of the Global pharmaceutical industries. The unit provides an automatic Stage 1 alarm for USP monograph 645 and comes complete with all requisite documentation.
|
|
4628
|
4628 USP <645> Conductivity Analyzer The 4628 is a panel-mount analyzer used with ABB's 2-electrode conductivity cells for complete compliance with USP <645>. The analyzer measures conductivity with exceptional accuracy and performance and provides a highly reliable device that satisfies the needs of the Global pharmaceutical industries. The unit provides an automatic Stage 1 alarm for USP monograph 645 and comes complete with all requisite documentation.
|
|
AnalyzeIT AX430
|
AnalyzeIT AX430 4-Electrode Conductivity Analyzer The AX430 is designed for use with ABB’s 4 electrode conductivity cells to measure conductivity with exceptional accuracy and performance. It incorporates the latest technology to provide a highly reliable, yet flexible, feature-packed device that satisfies a diverse range of process monitoring and control applications – click on the 'Data' tab to view.
|
|
AnalyzeIT AX433
|
AnalyzeIT AX433 Dual-Input, 4-Electrode Conductivity Analyzer AX433 enables two continuous measurements of mS/cm conductivity with simultaneous local display and transmission via analog outputs. The analyzer is designed for use with ABB’s 4 electrode conductivity cells to measures conductivity, with exceptional accuracy and performance. It incorporates the latest technology to provide a highly reliable, yet flexible, feature-packed device that satisfies a diverse range of process monitoring and control applications – click on the 'Data' tab to view.
|
|
AnalyzeIT AX436
|
AnalyzeIT AX436 Dual-Input, 4-Electrode Conductivity/pH & Redox(ORP) Analyzer AX436 enables two continuous measurements of mS/cm conductivity and pH/Redox (ORP) with simultaneous local display and transmission via analog outputs. The analyzer is designed for use with ABB’s 4 electrode conductivity cells and pH/Redox systems. It incorporates the latest technology to provide a highly reliable, yet flexible, feature-packed device that satisfies a diverse range of process monitoring and control applications – click on the 'Data' tab to view.
|
|
AnalyzeIT 4621
|
AnalyzeIT 4621 High-Level Conductivity Analyzers The 4621 is a wall-mount analyzer used with ABB's multi-electrode conductivity cells to provide reliable performance on high-level conductivity liquors. Applications include acis and caustic concentration monitoring in bottle-washing and CIP plants, and product/water interface detection in food and beverage industries. The 4621 offers high performance and advanced functionality in a compact cost-effective package. Rugged and reliable for safe operation in harsh environments, simple to install and use, and requiring minimum maintenance, these analyzers come with a 2 year warranty.
|
|
AnalyzeIT 4626
|
AnalyzeIT 4626 High-Level Conductivity Analyzers The 4626 is a panel-mount analyzer used with ABB's multi-electrode conductivity cells to provide reliable performance on high-level conductivity liquors. Applications include acids and caustic concentration monitoring in bottle-washing and CIP plants and product/water interface detection in food & beverage industries. The 4626 offers high performance and advanced functionality in a compact cost-effective package. Rugged and reliable for safe operation in harsh environments, simple to install and use, and requiring minimum maintenance, these analyzers come with a 2 year warranty.
|
|
TB82EC
|
TB82EC The ABB TB82EC Series Two-Wire Transmitters for use with 4-electrode conductivity sensors (TB4 family) are available with traditional programmable outputs or with advanced digital communications utilizing HART, Foundation Fieldbus or Profibus PA. The TB82EC is ATEX and CE certified, intrinsically safe and non-incendive. These industrially hardened transmitters lead the industry in ease of use and durability in the most demanding installations.
|
|
TB84EC
|
TB84EC The ABB TB84EC Series Four-Wire Transmitters for use with 4-electrode conductivity sensors (TB4 family) are available with programmable outputs, easy to read LCD display and advanced diagnostics. These industrially hardened transmitters lead the industry in ease of use and durability in the most demanding installations where line powered instruments are required.
|
|
TB82TC
|
TB82TC The ABB TB82TC Series Two-Wire Transmitters for use with toroidal conductivity sensors (TB404 family) are available with traditional programmable outputs or with advanced digital communications utilizing HART. The TB82EC is ATEX and CE certified, intrinsically safe and non-incendive. These industrially hardened transmitters lead the industry in ease of use and durability in the most demanding installations.
|
|
TB84TC
|
TB84TC The ABB TB84TC Series Four-Wire Transmitters for use with toroidal conductivity sensors (TB404 family) are available with programmable outputs, easy to read LCD display and advanced diagnostics. These industrially hardened transmitters lead the industry in ease of use and durability in the most demanding installations where line powered instruments are required.
|
